RadioLink Electronic Ltd
30
2.17 Auxiliary Channel "AUX-CH"
In addition to the two basic channels of the steering channel (channel 1)
and the throttle channel (channel 2), RC6GS V3 also has five auxiliary
channels, all of which can be customized to assign control switches.
The control switch of the auxiliary channel can be selected as ST, TH, VR,
SwA, SwB, SwC, SwD, LK-A, LK-B, LK-C, LK-D, NULL.
When it is set to NULL, the channel will not be controlled by any switch;
When the channel is set to ST as the control switch, the channel will be
controlled by the steering wheel;
When the channel is set as TH as the control switch, the channel will be
controlled by the throttle trigger;
SwB and SwC are three-way switches. After they are set as the control switches of the auxiliary channel, they
can directly control the minimum, maximum and middle values of the output value of the channel;
SwA and SwD are jog switches. When SwA/SwD is pressed, the channel output value will jump from the initial
value to the maximum value (or minimum value), and when the switch is released, it will return to the initial
value (For example, after pressing SwA, the channel 100 , and after releasing SwA, the channel
output will return to -100);
LK-A is the lock mode of SwA. When the channel is set to LK-A as the control switch,after pressing SwA, the
output of the channel will jump to the maximum value (or minimum value), and will not return to the initial
value when the switch is released. (For example, after pressing SwA, the channel o100, and after
releasing the switch, the +100 will remain unchanged. After pressing SwA again, the channel will output -100 ,
and the rudder will remain unchanged after releasing it).
LK-D is the lock mode of SwD, LK-B is the lock mode of SwB, and LK-C is the lock mode of SwC.
Note: The lock mode is another working logic of the jog switch and the three-way switch. After the channel
control switch is set to LK-A or LK-D, the SwA or SwD switch is also used to control the current auxiliary
channel, but the effect achieved is different from SwA and SwD. When setting to LK-A and LK-D, releasing the
switch will not return to the initial value. When set to SwA and SwD, releasing the switch will return to the
initial value. The effect of LK-B and LK-C is the same.
Setting method:
(1) Long press "Exit" and "Enter" button simultaneously for one second to enter the function menu of RC6GS
V3. Press "Inc(+)" button at the bottom of the screen to move the cursor to "17. AUX-CH", and then press "
Enter” button to enter the function setting interface.
(2) Press “Enter” button to get into CH3, CH4, CH5, CH6 or CH7 function interface.
(3) Press “Enter” button, the adjusted value stops blinking, now the value has been set.
2.18 Model Name "NAME"
RC6GS V3 stores model memories for 30 models. Each model memory can
be named separately according to user’s requirement.
Factory default name: MODEL1
(1) Long press "Exit" and "Enter" button simultaneously for one second to
enter the function menu of RC6GS V3. Press "Inc(+)" button at the bottom of
the screen to move the cursor to "18. NAME".
(2) Press “Enter” button to get into NAME function interface, the first
character of current name will blink, and the blinking character can be reset.
The common use characters appear at the bottom of the screen, use “Dec(-)”
