RadioLink Electronic Limited
22
CH5: -100~0~+100
Initial value : 0
(1) Enter the function menu and use “Dec(-)”or “Inc(+)” button to access SUBTRIM function.
(2) Press “Enter” button to get into SUBTRIM function interface.
(3) Use “Dec(-)” or “Inc(+)” button to select ST channel, press “Enter”key, and the initial value of ST will blink.
(Note: In the interface of adjusting the value, return to the initial value "0" by pressing “Dec(-)” and “Inc(+)”
buttons simultaneously for about 1 second.)
(4) Press “Enter” key, the adjusted value stops blinking, now the center of ST has been adjusted.
(5) TH channel and CH3 can be set similarly.
(6) When ending setting, return to the initial screen by pressing “Exit” button twice.
2.13 Channel Reverse "REVERSE"
Servo operation reversing
This function reverses the direction of operation of the servos related to transmitter steering, throttle, channel
3, channel 4, and channel 5 operation.
Channel
ST: Steering(CH1)
TH: Throttle(CH2)
CH3:Channel3(VR)
CH4: Channel4(SWA)
CH5: Channel5(SWD)
(1) Enter the function menu and use “Dec(-)” or“Inc(+)” button to access
REV function.
(2) Press “Enter” button to get into REV function interface.
(3) Use “Dec(-)” or “Inc(+)” button to select ST channel, press “Enter”key, and the “NOR” will blink.
(4) Press “Enter” key, the “NOR” stops blinking, Use “Dec(-)”or“Inc(+)”button to reverse the ST servo
operation direction.
(5) TH channel, CH3, CH4,and CH5.
(6) When ending setting, return to the initial screen by pressing “Exit” button twice.
2.14 Steering/Throttle Dual Rate "D/R"
Dual rate
The steering left and right servo travels are adjusted simultaneously.
When you want to increase the servo travel, adjust the + side. When you
want to decrease the servo travel, adjust the - side.
The servo travel amount of all channels can be reduced by Dual Rate
setting. Dual rate function is different from EPA, which requires the travel
amount on both sides of the channel to be set separately. Setting the rate
of D/R will affect the left and right travel amount at the same time. For
example, after setting a smaller throttle value, the travel amount of the
model forward and brake will be reduced at the same time, the setting
range is 0-100, the default is 100.
