4.Press the button key Enter, the value stops flashing, the setting is finished now.
5."Mode"and "Rate" can also be set by the same step.
6.Press button key Exit to be back to initial screen.
Remind: the above mentioned function GYRO SENSITIVITY is for RC4G only and
cannot use for RC3S
Fai l s af e
This function is set by servo, throttle, CH3 and CH4.
Option:
SERVO
THROTTLE
CH3
CH4
RANGE:
Servo: L100~R100
Throttle: B100~F100
CH3: -100~+100
CH4: -100~+100
Initial value: 0
1.Enter the menu, use Dec (-) and Inc (+) to select options to set.
2.Press the button key Enter to enter menu.
3.use Dec (-) and Inc (+) to select SERVO, then press Enter. Now the initial value
of SERVO will start flashing, use handle to change the value.
4.Press the button key Enter, the value stops flashing, now the value of SERVO
is set.
5.THROTTLE is to set by the trigger;
CH3 is to set by VR controller;
CH4 is to set by the button switch.
6.Press Exit two times to back to initial screen.
33