25
1.Enter the function menu and use “Dec(-)” or“Inc(+) ” button to access IDLUP
function.
2.Press “Enter” button to get into IDLUP function interface.
3.Press “Enter” key, and the initial value of RATE will blink. Use “Dec(-)” or
“Inc(+)” button to adjust the value.
(Note: In the interface of adjusting the value,return to the initial value "0%"by
pressing “Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)
Press “Enter”button,the adjusted value stops blinking,now the value has been set.
4.When ending setting, return to the initial screen by pressing “Exit”button twice.
Servo center position ne adjustment
Use this function to adjust the neutral position of the steering,throttle and channel 3
servos.
Channel
ST:Steering
TH:Throttle
CH3:Channel3
CH4:Channel4
Subtrim
ST:L100~R100
TH:B100~F100
CH3:-100~+100
CH4:-100~+100
Initial value : 0
1.Enter the function menu and use “Dec(-)” or “Inc(+)” button to access SUBTR
function.
2.Press “Enter” button to get into SUBTR function interface.
Subtrim "SUBTR"
