© 2014 Radiodetection Ltd
11
5 Press the
key to accept your selection and
return to the main menu
6 Press the
key to return to the main operation
screen
3.4.3 Power frequency (locator only)
Select the correct frequency (50 or 60Hz) for your
country or region’s power supply.
To change power frequency on the locator:
1 Press the
key to enter the menu
2 Scroll to the
POWER
menu using the
or
keys
3 Press the
key to enter the POWER menu
4 Scroll up or down to select the correct frequency
5 Press the
key to accept your selection and
return to the main menu
6 Press the
key to return to the main operation
screen
3.4.4 Measurement Units (locator
only)
The marker locator allows you to work in
Metric or Imperial (US customary) units.
To select your preferred units:
1 Press the
key to enter the menu
2 Scroll to the UNITS option using the
or
keys
3 Press the
key to enter the UNIT submenu
4 Scroll up or down to select
METRE
(for metric) or
IMP
(for imperial)units
5 Press the
key to accept your selection and
return to the main menu
6 Press the
key to return to the main operation
screen
3.4.5 Enable/Disable frequencies
The locator and transmitter support a wide range of
frequencies and there may be times when some of
these frequencies are not used. It is possible to quickly
enable or disable frequencies using the menu system.
To enable or disable frequencies:
1 Press the
key to enter the menu
2 Scroll to the
FREQ
menu using the
or
keys
3 Press the
key (on the locator) or the
key (on
the transmitter)to enter the FREQ menu
4 Scroll up or down to select the frequency
5 Press the
key (on the locator) or the
key (on
the transmitter)to enter the frequency
6 Scroll to OFF or ON
using the
or
keys
7 Press the
key to accept your selection and
return to frequency menu.
8 If you wish to make any further changes follow
steps 4 to 6. If you do not wish to make any further
changes press the
key twice to return to the
main operation screen.
3.4.6 Marker locator
By default the marker locator is enabled or disabled by
lowering or folding the marker loop antenna, item 9 in
Section 2, figure 2.1
You can choose to disable the marker locator function.
To disable the marker locator:
1 Press the
key to enter the menu
2 Scroll to the
MARKR
menu using the
or
keys
3 Press the
key to enter the MARKR menu
4 Scroll to
OFF
menu
5 Press the
key to accept your selection and
return to MARKR menu
If you have disabled the marker locator you can enable
it again.
To enable the marker locator:
1 Press the
key to enter the menu
2 Scroll to the
MARKR
menu using the
or
keys
3 Press the
key to enter the MARKR menu
4 Scroll to
Auto
menu
5 Press the
key to accept your selection and
return to MARKR menu
The marker locator can detect up to 9 different utility
markers. If you wish you can enable or disabling them
by using the menu system:
To enable or disable utility markers:
1 Press the
key to enter the menu
2 Scroll to the
MARKR
menu using the
or
keys
3 Press the
key to enter the MARKR menu
4 Scroll to the
AUTO
menu and press the
key
5 Scroll up or down to select a specific marker
6 Press the
key
7 Scroll to OFF or ON
using the
or
keys
Summary of Contents for rd7000+
Page 4: ... 2014 Radiodetection Ltd iii ...
Page 5: ... 2014 Radiodetection Ltd iv ...
Page 10: ... 2014 Radiodetection Ltd 3 ...
