Radiodetection rd7000+ Operation Manual Download Page 11

Page: 11 / 53

Section 2 - System overview

2.1 marker locator

2.1.1 Locator features

1 Keypad

2 LCD with auto backlight

3 Speaker

4 Battery compartment

5 Battery charger socket

6 Accessory socket

7 Headphone socket

8 Bluetooth module antenna

9 Marker loop antenna

2.1.2 Locator keypad

10 Power key

: Switches the unit on and off. Opens

the locator menu

11 Frequency key

: Selects frequency. Closes

submenu

12 Up and down arrows

: Adjusts the signal gain.

Scrolls through the menu options

13 Antenna key

: With antenna folded up, toggles

peak, combined peak/null and null (PL and TL
models) modes. With antenna folded down, toggles
marker and combined (marker/line) modes. Opens
a submenu

14 Graph key

: Send Survey measurements

15 Transmitter key

: Not used

2.1.3 Locator screen icons

16 Indicates the signal strength and peak marker.

17 Signal strength: Numerical indication of signal

strength

18 Peak / Proportional arrows: Indicates the location of

the line relative to the locator

19 Battery icon: Indicates the battery level

20 Volume icon: Displays the volume level

21 Fault-Find arrows (PL and TL models only).

22 Radio Mode: Indicates when Radio Mode is active

23 Power Mode: Indicates when Power Mode is active

24 Accessory indicator: Indicates when an accessory is

connected

25 A-Frame icon: Indicates when the A-Frame is

connected

26 Operating mode indicator

27 Bluetooth icon: Indicates status of Bluetooth

connection. Flashing icon means pairing is in
progress. Solid icon indicates an established
connection is active

28 Antenna mode icon: Indicates antenna selection:

Peak, Null and combined Peak/Null.

29 Sonde icon: Indicates that the signal source is from

a sonde (DL, PL and TL models).

30 Line icon: Indicates that the signal source is from a

line.

31 Compass/Marker mode indicator: Shows the

direction of the located cable relative to the locator.
Also used as a graphical indication for Marker mode
active

32 Current / depth indicator

Summary of Contents for rd7000+






















































Search results

Summary of Contents for rd7000+

Reviews:

Related manuals for rd7000+

Brands by name

Popular brands

Radiodetection rd7000+, Operation Manual

Search results

Summary of Contents for rd7000+

Reviews:

Related manuals for rd7000+

Brands by name

Popular brands