background image

90/UG113INT/01

© 2018 Radiodetection Ltd. All rights reserved. Radiodetection is a subsidiary of SPX Corporation. Radiodetection eCert and RD5100H

2

O+ 

are either trademarks of Radiodetection in the United States and/or other countries. The Bluetooth word mark and logos are owned by the 
Bluetooth SIG, inc. and any use of such marks by Radiodetection is under license. Due to a policy of continued development, we reserve 
the right to alter or amend any published specification without notice. This document may not be copied, reproduced, transmitted, modified 
or used, in whole or in part, without the prior written consent of Radiodetection Ltd.

Visit

 

www.radiodetection.com

Global locations 

Radiodetection (USA)

28 Tower Road, Raymond, Maine 04071, USA  
Tel: +1 (207) 655 8525  Toll Free: +1 (877) 247 3797  [email protected]

Pearpoint (USA)

39-740 Garand Lane, Unit B, Palm Desert, CA 92211, USA 
Tel: +1 800 688 8094  Tel: +1 760 343 7350   
[email protected] 

www.pearpoint.com

Radiodetection (Canada)

344 Edgeley Boulevard, Unit 34, Concord, Ontario L4K 4B7, Canada   
Tel: +1 (905) 660 9995  Toll Free: +1 (800) 665 7953  [email protected]

Radiodetection Ltd. (UK)

Western Drive, Bristol, BS14 0AF, UK   
Tel: +44 (0) 117 976 7776  [email protected]

Radiodetection (France)

13 Grande Rue, 76220, Neuf Marché, France 
Tel: +33 (0) 2 32 89 93 60  [email protected]

Radiodetection (Benelux)

Industriestraat 11, 7041 GD ’s-Heerenberg, Netherlands 
Tel: +31 (0) 314 66 47 00  [email protected]

Radiodetection (Germany)

Groendahlscher Weg 118, 46446 Emmerich am Rhein, Germany 
Tel: +49 (0) 28 51 92 37 20  [email protected]

Radiodetection (Asia-Pacific)

Room 708, CC Wu Building, 302-308 Hennessy Road, Wan Chai, Hong Kong SAR, China 
Tel: +852 2110 8160  [email protected]

Radiodetection (China)

13 Fuqianyi Street, Minghao Building D304, Tianzhu Town, Shunyi District,  
Beijing 101312, China  Tel: +86 (0) 10 8146 3372  [email protected]

Radiodetection (Australia)

Unit H1, 101 Rookwood Road, Yagoona NSW 2199, Australia 
Tel: +61 (0) 2 9707 3222  [email protected]

Summary of Contents for RD5100 H2O+













Reviews: