Page
59
of
60
©
2019 Radiocrafts AS
MBUS User Manual (ver 2.01)
MBUS USER MANUAL
Document Revision History
Document Revision
Changes
1.0
First release
1.10
Detailed UART interface and Encryption example included. Minor changes
and corrections
1.11
Timing and figure 3 corrections. Auto sleep included. Minor corrections in
text.
1.20
Added MBUS3
1.21
Clarified order of address bytes for binding.
1.22
MBUS3 updates before official release.
1.30
MBUS2 new features for FW 2.20:
-
Auto sleep functionality update for slaves.
-
8 Byte serial number reservations in configuration memory.
-
1 byte frequency tolerance calibration value in configuration memory.
1.31
- Changed terminology from RC1180-MBUSx to MBUSx
- Included quick start chapter (and removed it from data sheet 2.20)
- RSSI reading included (and removed it from data sheet rev 2.20)
- Optional custom specific version chapter included for MBUS2
- SLEEP_MODE, TIMEOUT and LED CONTROL update for MBUS2
1.40
MBUS3 new features for FW 3.09:
-
8 Byte serial number reservations in configuration memory.
-
1 byte frequency tolerance calibration value in configuration memory.
-
-SLEEP_MODE, TIMEOUT and LED CONTROL update
1.50
- Correction of SERIAL_NUMBER location
- Correction PART_NUMBER, HW_REV_NO and FW_REV_NO location
- info about only HEADER packets sending (L=0xFE) included
- Auto sleep info for MBUS3 Included.
- U, V and Y command info included
- Appendix 1&2 update
- Two level auto-message handler info included (New Feature FW 3.11)
1.60
- MBUS4 Description added
- MBUS3 Description for C1 mode added
1.71
Additional information and corrections for MBUS3 and MBUS4 versions
1.72
Updated RF_CHANNEL frequencies
1.73
-Updated MBUS4 description with CIG features; extended power table, LBT
and Category 1 receiver
- Minor corrections
1.75
Added description of new features in FW 1.05 (MBUS4)
More channels(11-
41), new data rate(5) and new test modes (‘7’ and ‘8’)
added for MBUS4
2.01
Rewritten to new company standard.
