Radio Thermostat CT32 Operation Manual Download Page 12

Page: 12 / 17

MANUAL Screen Functions

The CT32 has 2 manual override commands. The manual screen is accessed by touching the large

current temperature display in the middle of the HOME screen.

IMPORTANT:

The Mode must be in HEAT or COOL to access the manual screen.

TEMPERATURE

Touch the +/- arrows to select your desired Target Temperature. This temporary

change in target will revert to the programmed target at the next time slot . Touch HOME to return to

operation.

EMER

(in HEAT PUMP type)

If you set your CT32 for HEAT PUMP with auxiliary heat, EMER function is available on the MANUAL

scre

en. If you touch

EMER

, it displays

EMER|ON

. Your HEAT PUMP is disabled and auxiliary heat

is your sole source of heat. This manual override stays active until you toggle EMER off. Auxiliary

heat is more expensive than the heat pump so use EMER only if the heat pump cannot keep up or is

defective.

To use EMER heat automatically - If DIFF is set to 2F and RECOVERY is set to FAST, the CT32 will

use EMER heat automatically if the heat pump cannot keep up.

Summary of Contents for CT32


















Search results

Summary of Contents for CT32

Reviews:

Related manuals for CT32

Brands by name

Popular brands

Radio Thermostat CT32, Operation Manual

Search results

Summary of Contents for CT32

Reviews:

Related manuals for CT32

Brands by name

Popular brands