PG
12
Congratulations, you have successfully installed your unit. Please proceed to
the OPERATING Guide to initialize the CT101.
IMPORTANT:
If you have labeled and connected your wires
and followed the correct HVAC setup, and your system still does
not operate,
contact technical support
.
STATEMENT OF USE: Th
is thermostat can be used with
4AA batteries, 24VAC (C wire), 24VAC adapter, heating
and cooling systems and also millivolt heating. It cannot
be used with line voltage systems. This thermostat is digital
and your desired heat or cool temperatures can easily
be set on the large touch screen with the +/- buttons. A
minimum 4 minute off time protects the compressor from
damage.
This thermostat runs on 4AA batteries. The CT101 can be
externally powered with a power source rated from 12V to
24V, AC or DC, at 300ma or greater. If used, connect to the C and RH terminals (no polarity). The
24VAC “C” wire is the other side of the 24VAC heating transformer and can be found where the other
thermostat wires connect at the wall or at the furnace. Do not use the common or ground side of the
line voltage.
MENU
MODE
F
LINK
RADIO
TARGET TEMP
1
HEAT
AUTO
