17
1. Turn off the device you are connecting to the
power supply.
2. Set
POWER
to
OFF
.
3. Pull the tab on the cigarette-lighter socket’s
rubber cap on the side of the power supply
to expose the socket.
Notes:
• The rubber cap is attached to the power
supply. Do not try to remove it.
• Be sure to close the cigarette lighter
socket’s rubber cap when you are not
using the socket.
4. Connect the device’s DC power cord to the
power supply’s cigarette lighter socket.
22-503.fm Page 17 Friday, August 6, 1999 12:48 PM
