36
Se
ar
ch
in
g
37
Se
ar
ch
in
g
–Services– Menu
Aircraft
Search civilian and military air frequencies:
108-118 MHz
Navigation
118-137 MHz
Civilian Voice
138-150 MHz
Military Voice (excludes 2m Amateur)
225-400 MHz
Military Voice
Railroad
Search the Association of American Railroads (AAR) VHF
railroad frequencies used in the US and Canada.
Amateur
Search amateur radio frequencies:
28.0-29.7 MHz
10m Band
50-54 MHz
6m Band
144-148 MHz
2m Band
222-225 MHz
1.25cm Band
420-450 MHz
70cm Band
902-928 MHz
33cm Band
1240-1300 MHz 23cm Band
CB
Search the Citizens Band radio frequencies.
Marine
Search the VHF-FM marine radio band.
FRS/GMRS/
MURS
Search the FRS, GMRS, MURS, DOT and STAR radio
frequencies.
To change the Service Search parameters:
Press
MENU
while any Service Search is active. The following options
are available:
–”Service X”– Menu
Main Menu
Navigates to iSCAN’s Main Menu.
Srvc Srch Menu
Navigates to the Services Menu.
Store Channel
Stores a found frequency as an object in the first playlist.
Cancel Changes
Exits the Service Search Menu without saving changes.
Save Changes
Saves your changes and exits the Service Search Menu.
Attenuator
Limits the effective range of Service Search and may
help reduce interference from strong local transmitters.
Press
/II/SEL
or
to enable or disable Attenuator.
–”Service X”– Menu
Zeromatic
Helps iSCAN tune to exact frequencies when searching.
Press
/II/SEL
or
to enable or disable Zeromatic.
Zeromatic does not have any effect in channel-based
searches such as CB, Marine and FRS/GMRS/MURS
bands.
Delay
When delay is enabled, iSCAN waits for two seconds
after a transmission before resuming search. Press
/II/
SEL
or
to enable or disable delay.
RX Mode
Sets the RX modulation mode to automatic, or forces
AM mode or FM mode. RX Mode functions in Aircraft
and Amateur bands. Press
or
to change.
Frequency
Ranges
For Service Searches that utilize frequency ranges, this
option allows you to control which ranges are searched.
The Frequency Ranges option is available in the Public
Safety, Aircraft and Amateur Radio Service Searches.
Press
/II/SEL
or
to enable or disable frequency ranges.
Limit Search
iSCAN’s Limit Search feature allows you to configure a customized
search between the lower and upper frequencies that you choose.
To use Limit Search:
1.
Press
MENU
to access the Main Menu, scroll to
Search
, and
press
to enter to the Searches Menu.
2.
Scroll to
Limit Search
and press
to start the Limit Search.
n
Note:
Press
SKIP
to block reception of undesired signals.
To store found objects in playlists:
1.
Press
MENU
when you find a frequency you want to store.
2.
Select
Store Channel
.
3.
Press
SEL.
The new object is added to the first playlist and has
the alpha tag “Stored Search.”
n
Note:
To move the new object to another playlist or edit
the alpha tag, use the Object Edit Menu (see
) or the PC
).
