21
Battery
Charge
Camera
Software
Data
Charging starts automatically
when you connect the camera
to your PC with the USB cable.
This camera uses USB bus power to charge the battery. Before attempting to charge
the battery, install the software (
/
P.12) and then use the USB cable to connect the
camera to your PC.
CHARGING THE BATTERY
h
It takes approximately 2 hours to charge
a fully depleted the battery.
h
Number of available shots: Approx. 500
shots (when fully charged)
✽
This figure is an approximate guide to the number
of continuous shots that can be taken at room
temperature. The number of available shots will
be lower in cold locations or at low temperatures.
z
Check that “FLATFOTO Photo Album” software was installed correctly before connecting the camera to your PC
using the USB cable.
At normal temperatures, the battery can be used at
least 500 times.
✽
If the time for which the battery provides power shortens
markedly, this indicates that the battery has reached the
end of its effective life. Please contact the store from
which you purchased the camera. Battery must be
replaced at the customer's expense.
About the Battery Life
