19
• For security purposes, we rec-
ommend that you do not store
private numbers, such as per-
sonal identification numbers or
passwords.
• If you have pulse service and
want to use tone dialing, enter
TONE
at the appropriate
place in the number sequence.
• To store one or more pauses in
the memory number, see “Stor-
ing a Pause in Memory” on
Page 19.”
• Each pause or
TONE
entry
counts as one memory digit.
4. Press
MEM
(memory) to store the
number in memory. The phone
sounds a “chirping” beep and all
indicators turn off.
To store additional numbers, repeat
Steps 1-4 for each number you want to
store.
Notes:
• To change a number in memory,
simply store a new one in its
place.
• To erase a number from memory,
repeat Steps 1-4, and skip Step 3.
• Write the memory location num-
ber and name associated with
each stored phone number on the
memory dialing card. We recom-
mend you use a pencil in case
you want to change the name
later.
Storing a Pause in Memory
In some telephone systems, you must
dial an access code (
9
, for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number. However, you should
also store a pause after the access
code to allow the outside line time to
connect.
To add one or more 2-second pauses
to a phone number you are storing in
memory, press
HOLD
at each point
where a pause is needed.
TALK
CH
OFF
PRIVACY / LOW BATT
1
4
7
2
5
8
0
3
6
9
#
GHI
PRS
TONE
ABC
JKL
TUV
OPER
DEF
MNO
WXY
HOLD
FLASH
PRIVACY
MEM
REDIAL
PROG
MEM
MEMORY DIALING
•
•
•
•
•
•
•
•
•
•
CHARGE
IN USE
PAGE
POWER
PAGE
43-1083.fm Page 19 Tuesday, August 17, 1999 2:17 PM
