32
Thermometer Operation
alarm sounds for 1 minute, and
Hi
or
Lo
and the exceeded lim-
it (upper or lower) flash until you press any key.
The Caller ID module stores the highest and lowest recorded
temperatures since the last memory reset at its own location
and at each remote sensor’s location. Follow these steps to re-
view the temperatures.
1. Repeatedly press
REMOTE SENSOR
on the Caller ID mod-
ule to select the desired sensor.
2. Press
MEMORY
once to recall the highest recorded temper-
ature for that location and again to recall the lowest
recorded temperature.
To replace the high or low temperature with the current
temperature, hold down
MEMORY
while the high or low
temperature appears until the display resets and the cur-
rent temperature appears.
3. Press
MEMORY
again to return to the current temperature
display.
RESETTING A REMOTE THERMO SENSOR
If a remote sensor stops operating properly, use a pointed ob-
ject (such as a straightened paper clip) to press
RESET
inside
the sensor’s battery compartment. This resets the displayed
temperature and reinitializes the sensor’s transmitter. You must
43-939.fm Page 32 Tuesday, June 6, 2000 8:09 AM
