12
Preparation
In the Caller ID Module
Caution: When you replace the batteries, do not press any but-
tons on the Caller ID after you remove the old batteries. Doing
so could erase all stored information.
1. Use a Philips screw-
driver to remove the
screw from the battery
compartment cover.
2. Slide the battery com-
partment cover toward
the back of the Caller ID
until it stops, then lift the
cover.
Note: The battery compartment cover cannot be removed
from the case.
3. Put four AAA batteries into the compartment as indicated
by the polarity symbols (+ and –) marked inside. The mes-
sage indicator flashes and a tone sounds.
4. Close the cover and secure it with the screw. If you are
replacing the batteries, reconnect the phone line, AC
adapter, and the phone.
When
BATT
appears or the display dims, replace the batteries.
Make sure the Caller ID is unplugged from the telephone line
and AC power before replacing batteries.
43-939.fm Page 12 Tuesday, June 6, 2000 8:09 AM
