17
TAD Operation
To replay part of a message during playback, hold down
REPEAT
then release to resume playback.
To return to a previous message, hold down
REPEAT
until you see the desired message number.
To skip to the next message, press
SKIP
.
To quickly advance a message, hold down
SKIP
. The playback speed increases, allowing you to quickly scan a
message or move to any place within it. To resume normal playback, release
SKIP
.
To stop playback at any time, press
STOP
. The TAD beeps and resets to answer calls.
DELETING MESSAGES
To delete the current message during playback, press
DELETE
. The TAD beeps, then plays the next message
(or announces “End of messages”).
To delete all messages after playback, hold down
DELETE
until dE appears in the message counter window.
The TAD says “Messages deleted” and sounds a long beep to confirm that all messages are deleted.
Note: The TAD does not delete unplayed messages. If you have not played all of the messages, the TAD
sounds an error tone and does not delete any messages.
RECORDING A MEMO
A memo is a message you can record at the TAD for yourself or others. Memos are stored with incoming mes-
sages, and are replayed the same way (see “Playing Messages” on Page 16).
