background image

22

Troubleshooting

FCC STATEMENT

Your telephone complies with Part 68 of the 
FCC Rules. Upon request, you must provide 
the phone’s FCC registration number and 
REN to your telephone company. These 
numbers are on the bottom of the base. 

Note: You must not connect your telephone 
to:

• coin-operated systems

• party-line systems

• most electronic key phone systems

THE FCC WANTS YOU TO 
KNOW

In the unlikely event that your phone causes 
problems on the phone line, the phone 
company can temporarily discontinue your 
service. If this happens, the phone company 
attempts to notify you in advance. If advance 
notice is not practical, the phone company 
notifies you as soon as possible and advises 
you of your right to file a complaint with the 
FCC.

Also, the phone company can make changes 
to its lines, equipment, operations, or 
procedures that could affect the operation of 
this telephone. The telephone company 
notifies you of these changes in advance, so 
you can take the necessary steps to prevent 
interruption of your telephone service. 

Your phone might cause TV or radio 
interference even when it is operating 
properly. To determine whether your phone 
is causing the interference, turn off your 
phone. If the interference goes away, your 
phone is causing it. Try to eliminate the 
interference by:

• moving your phone away from the 

receiver

• connecting your phone to an AC outlet 

that is on a different electrical circuit 
from the receiver

• contacting your local RadioShack store 

for help

If you cannot eliminate the interference, the 
FCC requires that you stop using your 
phone.

Some cordless telephones operate on 
frequencies that might cause interference to 
nearby TVs and VCRs. To minimize or 
prevent such interference, the base of the 
cordless telephone should not be placed 
near or on top of a TV or VCR.

LIGHTNING

Your telephone has built-in protection circuits 
to reduce the risk of damage from surges in 
telephone line and power line current. These 
protection circuits meet or exceed the FCC 
requirements. However, lightning striking the 
telephone or power lines can damage your 
telephone.

Lightning damage is not common. 
Nevertheless, if you live in an area that has 
severe electrical storms, we suggest that you 
unplug your phone when storms approach to 
reduce the possibility of damage.

Summary of Contents for 43-3812

























Reviews: