Using Your Phone
7
during a call, you may “switch-over” to tone dialing
(refer to “Tone Dialing Switch-over”).
USING YOUR PHONE
M
AKING
AND
R
ECEIVING
C
ALLS
Ô
A
DJUSTING
THE
R
INGER
T
ONE
When the phone is in standby mode, pressing the
VOL/RING
key on the handset selects the handset ringer tone. There
are two ringer tones. Continue pressing the
VOL/RING
key to
listen to all tones. The phone keeps the last ringer tone
setting selected.
A
DJUSTING
THE
E
ARPIECE
V
OLUME
The handset earpiece volume settings (Low, Medium and
High) can only be adjusted during a call. Press the
VOL/
RING
key repeatedly to select Low, Medium and High.
When you hang up, the phone keeps the last volume setting
selected.
R
INGER
M
UTE
The
end
key can be used to temporarily mute the ringer
tone. When the handset is off the base and the phone is
ringing, press the
end
key and the ringer tone will be
Handset On Base
Handset Off Base
Answer call
When the phone rings,
remove the handset
from the base (Auto
Talk).
Press
talk
, any number
key,
✱
/tone
, or
#
(Auto
Talk).
Make call
1) Remove the handset
from the base and
press
talk
.
2) The TALK/BATT LOW
flashes and turns on.
3) Listen for the dial
tone.
4) Dial the number.
1) Press
talk
.
2) The TALK/BATT
LOW flashes and
turns on.
3) Listen for the dial
tone.
4) Dial the number.
Hang up
Press
end
or return the handset to the base.
Redial
1) Remove the handset
from the base and
press
talk
.
2) Listen for the dial
tone.
3) Press
REDIAL/
PAUSE
to dial the last
dialed number.
1) Press
talk
.
2) Listen for the dial
tone.
3) Press
REDIAL/
PAUSE
to dial the
last dialed number.
Ringer Mute None
Press
end
when
ringing.
Ô
NOTE
Ô
•
During a call, as you begin
to move your handset too far
from your base unit, noise
increases. If you pass the
range limits of the base unit,
your call will terminate within
1 minute.
•
The
REDIAL/PAUSE
key
redials the last number dialed.
•
The redialed number can be up
to 24 digits long.
43-3546.fm Page 7 Thursday, February 27, 2003 10:39 AM