Using Your Phone
10
3. Press
SPEED DIAL
or the memory location (
0
-
9
). A tone
indicates that the stored number is erased from
memory.
Changing the Digital Security Code
The digital security code is an identification code used to
connect the handset and the base unit. Normally, setting the
code is not necessary.
The first time you charge your handset, the security code is
automatically set. In the rare situation that you suspect
another cordless telephone is using the same security code,
you can change the code.
Ô
1. Remove the handset from the base unit. Press and
hold
PAGE
on the base.
2. The handset begins emitting a paging sound. While
holding
PAGE
, place the handset on the base unit. The
paging sound stops. Leave the handset on the base for
more than 3 seconds. A new random security code is
set.
Testing Stored Emergency Numbers
If you store an emergency service’s number (police
department, fire department, ambulance) and you choose to
test the stored number, make the test call during the late
evening or early morning hours to avoid peak demand
periods. Also, remain on the line to explain the reason for
your call.
Ô
NOTE
Ô
If the handset battery pack is
completely discharged or the
battery pack is removed, the digital
security code will be lost. If this
happens, a new security code is
set automatically next time the
battery pack is charged.
43-3546.fm Page 10 Thursday, February 27, 2003 10:39 AM