©2004. RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
32-2058
06A04
Printed in China
EFFECT SEND
(output)
—
connect a sound
effect device here to send another input
device’s signal to the sound effect device.
LINE 1, 2, 3, 4, 5, 6 —
connect audio sources, such as a
CD player, tape deck, VCR, or camcorder here.
PHONO 1/2 —
connect up to two low-level
audio sources, such as a turntable here.
OUTPUT AMP L/R
—
connect your receiver or amplifier here to
output the mixer sound through your stereo sound system.
OUTPUT REC L/R
—
connect your tape deck
here to record the mixer’s output signal.
Make sure you connect the mixer’s left (white)
and right (red) jacks to your sources matching
left (white) and right (red) jacks. See your
user’s guide for complete instructions on
making connections.
connections
EFFECT RECEIVE
(input)
—
connect a sound
effect device here to play signals from it.
AUX LINE MONO —
connect a mono
input source, such as a wireless
microphone receiver here.
AUX LINE MIC —
connect a low impedance
microphone with a
1
/
4
-inch plug here.
GND
—
connect the phono source’s
ground wire (green or black) here.
Remove the fuse compartment
cap to replace the fuse.
Depending on how you plan to use your
mixer, some or all of the following items may
be purchased separately:
• audio patch cord
• microphone with an XLR plug (DJ mic)
• microphone with
1
/
4
-inch plug
• stereo headphones
• 12V lamp bulb
accessories
