49
Beyond the Basics
2. Press the desired bank and the channel number where
you want to store the frequency. The display indicates
the bank and channel number. After about 1 second, the
frequency to be copied fl ashes.
3. Press
ENT
. All the conditions such as receive mode and
delay condition are copied onto the channel.
Channel
Stored!
briefl y appears. The scanner automatically returns
to search mode.
If you try to copy a frequency which is already stored, the
scanner sounds the notice tone 3 times after you press
ENT
.
Dupl.Freq. ChXXX
appears. If you want to copy the duplicate
frequency anyway, press
ENT
, or if not, press
CL
to cancel.
copying a frequency into an empty channel within a
bank
You can copy a frequency into a vacant channel in a
specifi ed bank when the scanner stops on the frequency
during search or tune mode.
1. Press
FUNC
then
ENT
when you fi nd a frequency you want
to copy.
Bank 9 Store?
appears.
2. If you want to copy the frequency into bank 9, press
ENT
.
It is stored in the fi rst available vacant channel in the
bank. Or, press your desired bank number to store, then
press
ENT
.
Channel Stored!
appears for 2 seconds. All the
conditions such as receiving mode and delay condition
are copied on the channel. After about 2 seconds, the
scanner automatically returns to search mode.
3. If you try to copy a frequency which is already stored, the
scanner sounds the notice tone 3 times after you press
ENT
.
Dupl.Freq. ChXXX
appears on the third line. If you
want to copy the duplicate frequency anyway, press
ENT
,
or if not, press
CL
to cancel.
