Radio Shack 20-527 Manual Download

Page: 38 / 88

Beyond the Basics

2. In the marine, CB, and FRS/GMRS/MURS bands, you

can directly select a channel or search through the band.
When

MAN

appears at the right of the third line, you can

directly select a channel (refer to “Band Charts”). Press
the desired channel number while

MAN

appears to select

it. You can also change the channels by pressing

3. Press

FUNC

then

SRCH

while

MAN

appears.

MAN

changes to

SRCH

and now you can search through the band. Press

FUNC

then

SRCH

again to return to the previous mode.

4. Rotate

clockwise and leave it set to a point just after

the rushing sound stops. After 2 seconds (if the delay
feature is on), the scanner starts searching.

5. When the scanner ﬁ nds an active frequency, it stops

searching.

band charts

search bank: SR0 marine band

Two frequencies are assigned in one channel in some
Marine frequencies. For example, 157.000 and 161.600
are assigned in Channel 20.

Receive mode: FM

Ch.

Frequency
(MHz)

Ch.

Frequency
(MHz)

156.0500

156.2500

156.3000

156.3500

Notes

Summary of Contents for 20-527

























































































Search results

Summary of Contents for 20-527

Reviews:

Related manuals for 20-527

Brands by name

Popular brands

Radio Shack 20-527, Manual

Search results

Summary of Contents for 20-527

Reviews:

Related manuals for 20-527

Brands by name

Popular brands