Radio Shack 20-427 PRO-2054, User Manual, Page: 28 / 56

28
Beyond the Basics
copying a frequency into a vacant channel
You can copy a frequency into a vacant channel
in a bank you specifi y when the scanner stops on
the frequency during search or tune mode.
1. Press
FUNC
then
ENT
when you fi nd a frequency
you want to copy. b-10 briefl y appears (default
setting), then a vacant channel number
appears.
2.
To copy the frequency into bank 10, press
ENT
. The scanner stores the frequency in the
fi rst available vacant channel in the bank.
Otherwise, enter any bank number then press
ENT
to store the frequency in the selected
bank. Channel number and frequency fl ashes
2 times. All the conditions such as delay
condition are copied on the channel. After
about 2 seconds, the scanner automatically
returns to search mode.
3. If you try to copy a frequency which is already
stored, the scanner sounds the notice tone
3 times after you press
ENT
. –dUPL– appears.
If you want to copy the duplicate frequency
anyway, press
ENT
, or if not, press
CLEAR
to
cancel.
copying a frequency into the
priority channel
You can copy a frequency into the priority channel
(see “Priority”) when the scanner stops on the
frequency during Search, Scan, Manual, Tune, or
WX mode.
Press
FUNC
then
PRI
when the frequency appears.