Radio Shack 20-427 PRO-2054, User Manual, Page: 22 / 56

22
The Basics
scanning the channels
To begin scanning channels or to start scanning
again after monitoring a specifi c channel, press
SCAN
.
You must store frequencies into channels
before the scanner can scan them. The scanner
does not scan through empty channels.
To change the scanning direction, press
 or  .
The scanner scans through all channels (except
those you have locked out) in the active banks
(see “Turning Channel-Storage Banks Off and On”
and “Locking Out Channels or Frequencies”).
NOTES