Radio Shack 15-100, User Manual

Page: 17 / 74

17
• For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
NOTE: Please have your original remote controls
handy before programming learning.
Programming a Learned Key
1. Press and hold P until the LCD displays
Code Set OK or
. Use the
keys to scroll through the LCD display
until
Learn
is displayed. Press OK .
2. The LCD displays
Add Learn OK or
. Press OK .
3. The LCD displays
Press Mode or
.
4. Press a mode key once (i.e., TV , VCR , PVR , CBL/SAT ,
CD , DVD , AUX , or AUDIO ) to assign a mode to learn
onto.
5. Place the RadioShack 8-in-1 LCD Remote head-to-
head (about 2" apart) from your original remote
control. Also locate the key (on your original
remote control) that you want the
RadioShack 8-
in-1 LCD Remote to learn.
6. Press the key on your RadioShack 8-in-1 LCD
Remote that wish to assign learning.
7. On the original remote, press and hold the key.
Continue holding the key on the original remote
until the
RadioShack 8-in-1 LCD Remote’s LCD
displays either
Success
or
Learn Fail
.
NOTE: Immediately after you have pressed the key
that will learn, the LED flashes rapidly and the
LCD displays
Learning
. The remote times
out after five seconds and returns to step 6.
8. Repeat steps 4 through 7 for another mode and/or
key or press
EXIT to exit programming. Repeat
steps 5 through 7 if learning failed.
Deleting a Single Learning Key
This process returns the key to its original programming
for the mode you select. You can also delete learned
programming by teaching a different function to the key
(see “Programming a Learned Key” on page 17).
1.
Press and hold P until the LCD displays
Code Set OK or
. Use the
keys to scroll through the LCD display
until
Learn
is displayed. Press OK .
2. Use the keys to scroll through the
LCD display until
Dlt Learn
is displayed. Press
OK .
2"
RadioShack 8-in-1 LCD ENG.fm Page 17 Friday, February 9, 2007 6:11 PM