Radio Shack 1200993, User Manual

Page: 7 / 11

12
Using W
eather
Radio
13
Using W
eather
Radio
Using the Weather Radio
The weather radio can monitor signal availability, which is
indicated by . If the signal is lost, flashes. If a signal loss occurs
and signal reminder is enabled, the weather radio produces a
series of beeps. The beeps terminate when a signal is detected
again or if a key is pressed.
UÊ /œÊ“œ˜ˆÌœÀÊÌ iÊÃiiVÌi`ÊV >˜˜i]Ê«ÀiÃÃÊ WEATHER/SNOOZE .
UÊ /œÊÃ̜«Ê“œ˜ˆÌœÀˆ˜}]Ê«ÀiÃÃÊ EXIT .
Adjust the Weather Radio Broadcast Volume
While the radio is receiving a broadcast ,
press c or d to adjust the volume.
When the radio receives an alert , it
sounds a tone or voice alert (based
on your settings) and displays an alert
`iÃVÀˆ«Ìˆœ˜Ê՘̈ÊÌ iÊ>iÀ̽ÃÊivviV̈ÛiÊ
time expires. To turn off the alert, press
WEATHER/SNOOZE .
Your weather radio can store up to 20
alerts. The screen shows the most recent
alert. You can press
SELECT to view
previous alerts, if their effective time is
not expired.
Set the Alarm
1.
Access the settings and scroll to SET
ALARM .
2.
Press SELECT and wait for 5 seconds.
3.
Press c or d to set alarm
ALARM ON
(
M
appears) or
ALARM OFF
(
M
disappears).
4.
Press SELECT . The alarm time appears.
5.
Use c É d and SELECT to set the hour,
“ˆ˜ÕÌi]Ê>˜`ÊÉ*ÊÃiÌ̈˜}ð
When the alarm sounds:
UÊ *ÀiÃÃÊ WEATHER/SNOOZE to silence the alert for 7 minutes.
UÊ *ÀiÃÃÊ c or d to toggle OFF and ON options. Press WEATHER/
SNOOZE to confirm (
ON ÊrÊ- ""<®°Ê
Note:
UÊ / iÊ>>À“Ê`ÕÀ>̈œ˜ÊˆÃÊÌÜœÊ œÕÀÃÊ՘`iÀÊÃÌ>˜`LÞʓœ`i°
UÊ 9œÕʓÕÃÌʎii«ÊÌ iÊÀ>`ˆœÊœ˜Ê̜ÊÕÃiÊÌ iÊ>>À“Êv՘V̈œ˜°
M
SET ALARM
M
ALARM 12:00
A
M