14
If you are mounting the CD changer
vertically, use a screwdriver to
remove the screws on both sides of
the CD changer from
H
and turn
SPRING ATTACHMENT H/V
to
V
on
both sides, then replace the screws
into
V
.
Caution: If you do not set
SPRING
ATTACHMENT H/V
on both sides of
the CD changer to the correct
mounting axis, the CD changer
might skip during play.
2. Use a medium-sized screwdriver to
attach the supplied mounting brack-
ets to the sides of the CD changer.
3. Using the supplied mounting studs
as templates and the width between
the mounting brackets as a guide,
mark the positions for the mounting
holes.
4. Attach the mount-
ing studs to the
mounting surface
using the supplied
screws.
5. Attach the CD changer to the
mounting studs using the supplied
nuts.
Mounting the Audio Adapter
Use the supplied screws to attach the
Audio Adapter under the vehicle’s dash-
board.
Use cable ties (not supplied) to secure
the Audio Adapter‘s wires under the ve-
hicle’s dashboard.
Mounting
Stud
Mounting
Bracket
CHA
NGE
R
10-C
D
RadioS
hack
12-2182.fm Page 14 Friday, September 3, 1999 7:31 AM
