ASW1003 [MG2475-EVK] Getting Started
V1.0 Page:6/27
3. CP210X DRIVER INSTALLATION
CP210x on EVB is USB-to-UART controller. The driver for CP210x should be installed first,
because it makes a PC to recognize the EVB.
The following is the installation steps.
(A) Execute CP210X_VCP_Win_XP_S2K3_Vista_7.exe to install CP210x VCP drivers.
(B) At the final step of installation, check
“Launch the CP210x VCP Driver Installer” and
press
“Finish”.
If it is not checked, it can be reinstalled later by executing
“C:\SiLabs\MCU\CP210x\Windows...Vista_7\CP210xVCPInstaller.exe”.
(C) Press
“Install”. The “CP210x USB to UART Bridge Driver” is installed on the PC.
(D) If the driver is not installed, it can be installed manually when CP210x is connected to the
PC. The driver is located in
“C:\Program Files\Silabs\MCU\CP210x” folder.
