ASW1003 [MG2475-EVK] Getting Started
V1.0 Page:21/27
7.4. Transmission and Reception
7.4.1. RX-Station : Start receiving
Press
‘r’. Then, RX-Station is ready to receive packets from TX-Station.
7.4.2. TX-Station : Start transmitting and Result
Press
‘t’. Then, TX-Station starts transmitting to RX-Station. To stop transmitting, type ‘x’.
When one packet is transmitted, a character which indicates the result of transmitting is
printed as follows;
‘.’ : Successful
‘!’ : Failed because ACK packet is not received.
‘?’ : Failed because the packet is not transmitted for channel access failure.
After transmitting all number of packets defined by NumOfPacket, the result is printed as
