Digital BUS-WATCH
®
SD40
Page 14 of 72
Radio Engineering Industries, Inc.
640434 -- Rev 0 -- 9/30/2011
Initial Set Up
The Digital BUS-WATCH® system will operate prior to any user setup with the
default settings. However, it may not show the correct time and date (factory set to
Central Standard Time). To set the correct date and time, and program the system
operation to your requirements, please refer to the
Menu Configuration
section of this
manual.
When accessing the menu, it is necessary to connect a video monitor to the video
jack on the front or back of the unit. REI recommends our battery-powered 7-inch Color
LCD monitor, P/N 690554.
Removable SD Card
DVR Loading and Unloading
Inserting the SD Card:
Turn the SD card key to the unlocked and off position. Slide
the SD card door to expose SD card slot. Insert the SD card into the slot all the way,
release, and verify it is locked in place. Close SD card door and turn the SD card key
to the locked and on position, as shown in Figure 8 on Page 15.
Removing the SD Card:
Turn the SD card key to the unlocked and off position. Slide
the SD card door to expose SD card slot. Eject SD card by pressing it all the way then
release. Gently remove the SD card from the slot.
Note:
The Digital BUS-WATCH
®
SD40 will not function properly if the SD card key
is in the unlocked or off positions. If there is no SD card present in the slot but the key
is in the locked and on position, the Digital BUS-WATCH
®
will still power up
normally, the menus can be accessed, etc.; however, the unit will not be able to record
any video.
