can be controlled like a two voice polyphonic module. Both oscillator
swarms have independent outputs. That allows for processing both audio
signals independently. In conjunction with our RT-451 Dual Filter Module,
you have independent multimode filters for both outputs.
1V/Oct-Input and Scale-knob
This jack accepts the keyboard voltage in Volt/Octave. The corresponding
parameter knob for setting the scale quantize function is directly there
above. In the middle of the range, the quantization grid is switched off and
the pitch control is infinitely variable. To the right, you can select scales
that have a major character and to the left you will find minor scales. Here
is a list of all available Scales:
-7: PentatonicMinor
-6: BluesMinor
-5: GipsyMinor
-4: MelodicMinor
-3: HarmonicMinor
-2: NatureMinor
-1: Dorian
-0: Not quantized/default (mid position)
+1: Chromatic
+2: DiatonicMajor
+3: Lydian
+4: Mixolydian
+5: Hexatonic
+6: BluesMajor
+7: PentatonicMajor
With the Tune control of Oscillator 1, one can transpose the scales
into other keys.
FM-02 and Depth
You can probably imagine this - this is about the external or internal
frequency modulation of Oscillator 2.
Out1 and Out2 and Mix-knob
These are the two oscillator outputs. The Mix control above the jacks
allows you to change the output routing of the oscillators. In the center
position of the MIX controller, the oscillator 1 signal passes to output 1 and
the oscillator 2 signal to output 2.
Turning the control to the left, the oscillator 2 signal is added to the
oscillator 1 signal (OUT1). Oscillator 2, however, output 2 is still obtained.
To the right of the control path, the output behaves accordingly, except that
the output signal from oscillator 1 is added to the signal of oscillator 2.
Oscillator 1 continues to appear at output 1 in this setting.
of
11
16