background image

14

In this manual, you will find a card containing details of your limited warranty. Please contact your 

distributor if you encounter issues with your unit or to procure replacement filters or reactor cham

-

ber when these reach their end of life. 

Damage or malfunction caused by negligence, abuse, unauthorized repairs or use not in accordance 

with the User Guide will not be covered. All warranties are rendered void and the cost of repair will be 
payable by the user in the case of damages caused by:

-   putting in foreign objects (such as water, liquids, fragrance oils, toys etc.) in or out of the unit;
-   transportation or handling;

-   use of products such as benzene or thinners;

-   incorrect power supply or output voltage;

-   breakdown or loss of part caused by unauthorized disassembling or modifications;

-   repair or replacement undertaken by unauthorized persons

-   non-adherence to the instructions provided in this user guide, and as given by the local customer 
service center;
-   careless or improper use; and
-   caused by operating the product in a corrosive or moist environment.

CUSTOMER SERVICES

The company reserves the right to make changes to the design and specifications of the product 

without prior notice.

Description

Air Sterilizer

Brand

VIRUSKILLER

Model No

VK 401

Max. Elec. 
Consumption

120 watt

Net Weight

12.9 Kg

Net Dimensions

365 H x 165 D x 581 W mm

Airflow (CFM)

70 – 141

UVC Lamps

8

TiO

2

 Hexagon 

Filters

~40

Power cord length

1.2 m

SPECIFICATIONS

Summary of Contents for VIRUSKILLER VK 401

















Reviews:

Related manuals for VIRUSKILLER VK 401