background image

Installation Manual 

COMBI - TA05A005.C0604

 

1

HEAT TECNOLOGY SINCE 1959 

 

Thank you for choosing RADIANT 
 

Declaration for purposes of Art. 7 of Law 46 of 5 April 1990. 

RADIANT BRUCIATORI S.p.A. hereby declares that all of its products are constructed to industry standards as required by the Article in 
question and by Article 5 of the law in effect (D.P.R. no. 447/97). 
 
All 

RADIANT

 boilers are constructed according to: 

 

 

UNI-CIG 7271 (april 1988) 

 

UNI-CIG 9893 (december 1991 ) 

 

EUROPEAN STANDARD UNI EN 297 Gas-fired  central heating boilers  - Type B

11

 e B

11BS

 boilers fitted atmospheric burners of nominal 

heat input not exceeding 70 kW; 

 

EN 483 Gas-fired  central heating boilers – Type C boilers of nominal heat input non exceeding 70 kW; 

 

EUROPEAN STANDARD UNI EN 677 Gas-fired  central heating boilers – Specific requirements for condensing boilers with a nominal heat 

input not exceeding 70 kW; 

 

GAS DIRECTIVE 90/396 EEC  for CE marking - Appliances burning gaseous fuels  

 

GAS DIRECTIVE 73/23/EEC - Low voltage 

 

GAS DIRECTIVE 89/336/EEC - Electromagnetic compatibility 

 

GAS DIRECTIVE 92/42/ECC requirements for new hot-water boilers fired with liquid or gaseous fuels 

 
All 

RADIANT

 boilers are constructed according to UNI - CIG 

(EC)

 norms. The materials used, such as copper, brass, and stainless steel form 

a compact, homogeneous, highly functional unit that is easy to install and simple to operate. The wall-mounted boiler is equipped with all of the 
approved accessories required to make it a true, independent heating plant for home heating and for the production of hot water for domestic 
needs. All boilers are fully inspected, and come with a certificate of quality signed by the inspector and with a warranty certificate. This booklet 
must be read carefully and stored in a safe place, accompanying the boiler at all times

 

RADIANT BRUCIATORI S.p.A. declines any and all responsibility for misinterpretations of this booklet deriving from any translations 

of same. 

 

RADIANT BRUCIATORI S.p.A. will not be responsible for non-observance of the instructions contained in this booklet or for the 

consequences of any action not specifically described herein.

 

 

Summary of Contents for RBS 20 E

























Reviews: