background image

5

2.  Safety Instructions 

As with any electrical device, certain precautions must be taken in order to ensure  
your safety� 

READ ALL INSTRUCTIONS BEFORE USE�

ALL WARNINGS AND CAUTIONS SHOULD BE STRICTLY FOLLOWED�

WARNINGS - To reduce the risk of injury 

1. 

Use this device only for its intended use as described in this manual� 

2. 

Always check the Light Unit Assembly (LUA) for brown or darkened spots in the 
area inside the LUA lamp opening before use� If any spots appear, do not use the 
LUA lamp and return it for replacement� 

3. 

This device should never be left unattended when plugged into an outlet� 

4. 

Never operate this device if it has a damaged cord or plug, if it is not working 
properly, if it has been damaged or dropped into water� In any of these cases, 
return the device to a service center for examination or repair� 

5. 

Do not attempt to open the handpiece or base of this device�  

6. 

Do not attempt to touch the hot area within the Light Unit Assembly (LUA)� 

7. 

Do not use an extension cord with this device� This device should be used only 
with the supplied AC cord� 

8. 

Do not reach for an appliance that has fallen into water� Unplug immediately� 

9. 

Do not place or store this device where it can fall or be pulled into a tub or sink�

10. 

Do not place in or drop into water or other liquid� 

11. 

Always unplug this device from the electrical outlet immediately after using� 

12. 

Unplug this device before cleaning� 

Summary of Contents for FSD+

































Reviews: