5
INSTALLED WITHIN THE PERIMETER OF BATH TUBS OR SHOW-
ERS. This means that it cannot be installed in the areas marked as
VOLUME 1 in picture 2.
• During function, place the heater in a safe position:
-
at least 1m far from inflammable objects or furnitures;
-
leaving not less than 1m of free space in front of the heater;
- not located immediately below a socket-outlet.
• Do not leave animals or children touch or play with the appliance. Pay
attention! The air outlet grille gets hot during operation (more than
90°C)
• Do not use the heater in rooms with explosive gas or while using in-
flammable solvents or varnish or glues.
• If the cordset is damaged and you have to change it, do not do the job
yourselves! Take the product to an after sales authorised repair centre
or to a person with similar skill and knowledge, in order to avoid any
risk of danger.
• The appliance must be positioned so that the plug is always accessi-
ble.
• Do not mount the product on walls made of synthetic material.
• WARNING: Do not use this heater in small rooms when they are occu-
pied by persons not capable of leaving the room on their own, unless
constant supervision is provided.
•
WARNING: To reduce the risk of fire, keep textiles, curtains, or any
other flammable material a minimum distance of 1 m from the air outlet.
2.
Your product
•
Other than the heater you have chosen the package includes (picture 1):
-
N° 1 metal brackets for wall mounting (fixed to the radiator);
-
N° 4 nylon plug expansion 8x50mm;
-
N° 4 5x60mm cross head screws to fix wall brackets;
-
N° 2 bars for towels;
-
N° 4 3,9x13mm screws to fix the bars to the heater.
•
Refer to your dealer is something is broken or missing.
3.
Wall mounting
•
Only fix the heater in vertical position;
•
This heater is fitted with a double electrical insulation circuit (class II) and therefore does not require an earth connection.
•
This heater must be correctly installed in compliance with the regulations in force in the country of installation.
•
In wet spaces like bathrooms or kitchens, the connection terminal must be installed at least 25 cm above the floor. The
electrical connection to the power supply must also be fitted with a two-pole switch with a minimum gap between the
contacts that allows complete disconnection according to excess voltage III category conditions.
•
If you want to fix one or both towel rails to the product, before fixing the appliance to the wall bracket use the supplied
screws as illustrated in picture 3.
