4
5. Hand grip
6. Intake air vent
7. Hole for pipe (for discharging condensate
outside)
8. Water tank
3. Control panel
4. Using the product
SWITCHING ON
Having plugged the plug into a socket, push the POWER button. You will hear a "bip", the display lights
up and the OPERATION LED switches on.
To switch off the product, simply push the POWER button again.
SETTING THE VENTILATION SPEED
Push the SPEED button to set the ventilation / dehumidifying speed at one of the two levels LOW or HI.
(High) The corresponding LED switches on.
SETTING THE DESIRED HUMIDITY
You can set the relative humidity of the air that you want in your room.
From a minimum of CO = continuous operation (which corresponds to 30%) up to a maximum of 90% with
steps of 10%. There is an AU position, for operating in AUTOMATIC mode (see following paragraph). To
adjust the humidity, press the HUMIDITY SETTING button a number of times. The display flashes and
after a few seconds shows the ambient air humidity. To view the humidity setting simply push the
HUMIDITY SETTING button once. Pushing it subsequently will vary the humidity setting.
