change the belonging zone, the product name and switch the product off. By dragging the product icon from right to left, you
will find a button that allows you to delete it and erase it from the product list.
Active Mode:
an icon represents the active mode using the same symbol on the product display. If the programmed mode
is active, the clock symbol is flanked by the scheduled operating mode icon. The active program name too is shown to the
right of this symbol.
Last 7 days usage:
The energy consumption of the last 7 days is displayed and the consumption trend is graphically
represented for each day. Pressing on the graph you access the section of usage analysis.
Zone name:
it indicates the name assigned to the zone and can be customized following the instructions below.
Zone management:
it
allows you to view the defined zones list and to delete or create new ones. For each zone the name
and active mode are indicated and it is available a key to change the operating mode of all the zone products.
Weekly programming:
by pressing this icon you access the weekly programming section. In this section it is possible to
modify the default preset program or to create new ones. Each program can be associated with a customized name and
color to facilitate identification.
The cancellation of a program can be done by dragging the program icon from right to left.
Usage:
by pressing this icon you can access the usage analysis section and view the data collected on a daily, weekly or
monthly basis - divided by area or grouped.
Operating Mode selection:
it allows you to select the operating mode choosing between Comfort, Eco, Antifreeze,
Programmed, Pilot wire and Stand-by. If desired, this variation can be timed: at the end of the set time, the active mode will
return to the one set before the change.
Product Name:
The product name is shown in the center of the display. If a zone includes several products, the relevant
information (name and room temperature) are shown in sequence.
Room temperature:
the temperature measured by the product sensor is displayed.
Settings:
in this section it is possible to:
- View the tutorial explaining how the App works;
- Activate cost control allowing to add to the kWh value an economic value too by specifying the unit cost of energy;
- Manage user notification if the open window sensor is enabled and goes into operation;
- Manage user notification if one or more products are in Standby mode while the zone they belong to are set to a different
mode;
- Manage user notification if a set consumption or expense threshold is exceeded;
- Change the password of the account;
- Change of the updates and promotions receipt consent.
Summary of Contents for ICON 10
Page 103: ......
Page 104: ...ISICO002_R2...
