Displaying the ambient temperature
The
display
shows
the
ambient
temperature measured by the radiator.
Alignment of the ambient temperature
This function is used to edit the ambient
temperature measured by the radiator
and used to manage heating power, if it
needs to be corrected to compensate for
reading errors due to things like being
near to heat sources, or cold air
draughts.
The display flashes the correction value
to be applied. To edit it, push the “+” or “-
“ keys.
If, for example, the temperature set on
the radiator is 19,2°C and the ambient
temperature is measured at 19,5°C, align
it by +0,3°C.
Always wait at least 4 hours for the
temperature to settle, before doing any
alignment.
6.3.1 Open window sensor
This function makes it possible to detect an open window and automatically activate the Anti-freeze operating mode.
If a sudden reduction is temperature is detected when the radiator is operating normally, anti-freeze mode is activated
automatically to reduce energy wastage. On the display the window and anti-freeze symbols flash together, while the
symbol for the operating mode set by the user stays on.
Reinstating normal operation does not occur automatically, but must be activated by pushing the "M" key.
Important:
Correct operation of this function may depend on where the radiator is positioned in the room, the presence of draughts, the
outside temperature, and how long the window stays open.
Summary of Contents for ICON 10
Page 103: ......
Page 104: ...ISICO002_R2...
