Accessories Inventory: (quantity),(install step A to F), description
1.
(1)(A) Base Plate shipping block, and 5mm “L”-shaped hex wrench.
2.
(1)(A) Stylus overhang setup protractor: Plexiglas center hole with engraved line.
3.
(1)(A) 5 volt AC adapter: power supply for the Stealth One.
4.
(1)(B) Counterweight, counterweight rod, two blue knurled locking nuts, 5mm “L” wrench.
5.
(2)(B) Wands: one higher mass (medallions), one lower mass (ladder), finger lifts.
6.
(2)(B) Cartridge mounting pads: one pre-mounted in each wand.
7.
(1)(B) Cartridge “simulator” block, for verifying cartridge verticality.
7.
(1)(B) Cartridge “simulator” block, for verifying cartridge verticality.
8.
(10)(B) M2.5 x 1” nylon screws, Philips head: for cartridge mounting, straight Razor blade,
microfiber cloth, small Philips head screw driver.
9.
(1)(C) Stylus overhang adjustment tool: Blue knurled nut mounted on a threaded rod; M2 hex
“L” shaped hex wrench: sets depth stop inside the cartridge mounting pad.
10.
(2)(D) Elevator adjustment knob: round black knurled knob with hex socket at bottom.
11.
(2)(E) Stylus spotlights: curved LED’s, one bright white, one warm white spectrum.
12.
(1)(F) Vial of damping and/or mass adjusting lavender “silly putty”-like viscous material.
13.
(0) base plate shims,
2
