Radial Engineering Power-2, Owner'S Manual

Page: 5 / 8

True to the Music
Radial Engineering Ltd. Power-2 Owner’s Manual Radial Engineering Ltd.
WARNING - IMPORTANT SAFETY INFORMATION
1. READ INSTRUCTIONS
All the safety and operating instructions of your Power-2 should be read before power is applied to the equipment. Retain this user
manual for future reference.
2. HEED WARNINGS AND OPERATING INSTRUCTIONS
All warnings on the equipment and operating instructions are important and should be followed.
3. HEAT, WATER AND MOISTURE
The equipment should be kept away from areas of high temperature, i.e., heater vents, radiators, stoves/ovens, fireplaces, etc. The
equipment should not be used in or around water, or in areas prone to flooding.
4. POWER SOURCES
The equipment should be connected only to a power source of the same voltage and frequency as that listed on the rear panel
above the power cord entry point.
5. POWER CORD PROTECTION
Power cords should be arranged so they do not interfere with the movement of objects in the room: people, fan blades, utility carts,
etc. Also, care should be taken that the cord is not pinched or cut, and placed so it is not in danger of being pinched or cut.
6. POWER CORD GROUNDING
The power supply cord is of a three wire grounded type, designed to reduce the risk of electric shock. It is assumed to be of suitable
length for most uses of the equipment. The use of extension cords and power strips is discouraged unless they are of suitable rating
to deliver the required total current for safe operation of all connected equipment. Furthermore, extension cords or power strips must
provide the same three wire grounded connection. It is important that the blades of the equipment’s plug be able to fully insert into the
mating receptacle. Never remove the round grounding pin on the plug in an attempt to mate to a two wire ungrounded receptacle.
7. NON-USE PERIODS
During periods of extended non-use, the power cord should be unplugged from the power source.
8. LIQUID ENTRY
Care should be taken so that liquids such as cleaning fluids or beverages are not spilled into the enclosure of the equipment.
9. DAMAGE REQUIRING SERVICE
Equipment should be serviced by qualified service personnel when:
A. The power supply cord or plug has been damaged, B. Liquid has been spilled into the equipment, or the equipment has been
exposed to rain, C. The equipment has been dropped, or the enclosure has been damaged, or D. The PROTECT LED on the front
panel no longer illuminates when the equipment is connected to a power source.
10. NO USER ACCESSIBLE PARTS
The Power-2 has no user accessible parts inside the device and should only be serviced by a qualified technician.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
NOTICE
Radial Engineering Ltd. shall under no circumstances be held responsible for any loss, damage or injury resulting
from the use of this product in a manner inconsistent with any of the procedures outlined in this document. The user is
responsible for determining whether this product is appropriate for the intended application. Radial Engineering Ltd. is
not responsible for any indirect, secondary or ancillary loss or damage, including personal injury, loss of or damage to
property or loss of income resulting from the operation or failure of this unit.