True to the Music
®
Radial Engineering Ltd.
DAN-TX2
1
OVERVIEW
The DiNET DAN-TX2 is an analog to digital converter that is designed
to take the signal from both consumer and professional line-level audio
sources and transmit them over an existing Dante or AES67-enabled
network.
The DAN-TX2 is equipped with a variety of connection options to make
it easy to connect with any type of audio equipment. The included stereo
3.5mm, RCA and XLR/TRS combo connectors are wired in parallel to
allow for immediate hookup of laptops, tablets, smartphones, consumer
audio devices, broadcast and professional audio equipment without the
need for adapter cables.
The inputs of the DAN-TX2 are processed using high quality 24 bit/96kHz
analog-to-digital converters, providing two channels of Dante digital
outputs over a single Ethernet connector, and allowing easy integration
of analog audio devices with an existing Dante network.
The DAN-TX2 is easy to use, with no setup required on the device itself.
It is completely configured by Dante Controller, which manages digital
audio routing across the Dante network. Dante Controller is a software
application by Audinate™ that allows the user to manage all Dante-
enabled devices across a network. Use Dante Controller to route audio
from the DAN-TX2 to ny number of destinations on the network. Simply
connect the DAN-TX2 to the network and it will automatically appear as
an available transmit device within Dante Controller.
The DAN-TX2 will initially have the name “DiNET-TX2-xxxxxx”, where
the last 6 digits will be the unique media access control address (MAC
address) of your DAN-TX2. As this can be changed to a user-generated
name using Dante Controller, we recommend writing down the MAC
address of your unit in the space provided below for future reference.
Record your DAN-TX2 MAC address here:
DiNET-TX2-__________________
Dante Controller can be downloaded for free at www.audinate.com. For
latest firmware for the DAN-TX2 please visit www.radialeng.com.
Dante Network
Cat 5e / Cat6
