True to the Music
®
Radial Engineering Ltd.
DAN-TX2
5
DAN-TX2 WITH UNBALANCED CONSUMER AUDIO
When using the DAN-TX2 with consumer audio devices, typically either
the RCA connectors or the mini 3.5mm connector will be used, however,
the XLR/TRS inputs can also be employed. The DAN-TX2 will accept
consumer line level signals such as those from a CD/DVD player, laptop,
tablet, or smartphone. The TRIM control can be used to fine tune the level,
and the PAD can be engaged should further attenuation be required.
When connecting to stereo input sources, engage the LINK switch to
allow the TRIM and PAD on Channel-1 to affect both left and right signals
equally, providing you with the ability to adjust the levels of both channels
using just one control without altering the stereo balance.
Only one set of inputs should be used at a time, as they will all sum
together to the left and right Dante outputs over Ethernet. To connect
more than one device at a time to the Dante network, use multiple
DAN-TX2 units.
Dante Network
Link
