User manual
B-RAD X
V1.0 - May 2023
17
3.4.3. LED Display Brightness
See Section 3.4.1 Confi guration Menu to navigate to the sub-menu this option is located in.
The Brightness menu is used to adjust the brightness level of the LED Display.
To change the brightness level of the LED Display:
1. Use the / buttons to navigate to Brightness and press
Enter.
2. Use the / buttons to select desired LED Display Brightness level.
3. Press
Enter
to save the selection.
Note:
For a visual representation of the menu layout and how to get here see Section 3.6 Menu Tree –
Overview.
3.4.4. The 2-Hand Safety Setting
See Section 3.4.1 Confi guration Menu to navigate to the sub-menu this option is located in.
The 2-Hand menu is used to set the safety setting for how both hands should interact with the tool during
a cycle. Enabling it greatly reduces the chance that a hand gets pinched by the reaction arm.
Settings available:
•
“Off”:
2-Hand setting is disabled and only the trigger needs to be pressed to initiate torquing by the tool.
•
“Start”:
while the trigger is pressed, the cancel or down button must be pressed once to initiate
torquing by the tool.
•
“oPrtn”:
while the trigger is pressed, the back or down button must be pressed during the entire cycle
to keep the tool torquing.
To change the 2-Hand setting:
1. Use the / buttons to navigate to 2hand and press
Enter.
2. Use the / buttons to navigate to the desired settings.
3. Press
Enter
to save the selection.
Note:
For a visual representation of the menu layout and how to get here see Section 3.6 Menu Tree –
Overview.
