34
EN
18. Erase all settings, software reset
If necessary, you can erase all of your settings and return
the RolloTron Standard system to its original
factory settings.
1.
+
+
+
Simultaneously press and
hold the buttons for 4 sec-
onds.
2.
All of the LEDs flash red by way of confirmation.
3.
Release the buttons, subsequently all of the settings will
be deleted.
End points / switching times / automated solar function /
automatic twilight function.
19. Carry out hardware reset
A hardware reset can be carried out in the event that the
RolloTron Standard fails to react to commands.
ATTENTION!
Never press the reset button when the motor is running,
as otherwise the end points will be modified.
A hardware reset causes the internal power supply to
the RolloTron Standard to be briefly interrupted. The
opening and closing times must be reconfigured
accordingly. All other settings are retained.
1.
Press the reset button using a sharp
object (e.g. a paper clip).
i
