![RADEMACHER RolloTron Standard Translation Of The Original Operating And Assembly Manual Download Page 22](http://html1.mh-extra.com/html/rademacher/rollotron-standard/rollotron-standard_translation-of-the-original-operating-and-assembly-manual_3224293022.webp)
22
EN
i
Set the upper end point
1.
+
Simultaneously press and hold the
buttons.
The roller shutters travel up.
1.1
Tighten the belt slightly, until it is tensioned by the
weight of the roller shutters.
2.
+
Release the buttons as soon as the roller
shutter achieves the desired position
for the upper end point.
The roller shutter stops and the upper
end point is stored.
ATTENTION!
Setting the wrong upper end point may lead to over-
load or damage the RolloTron Standard or the drive.
◆
Do not set the upper end point right up to the limit
stop.
◆
Release the button promptly and never allow it to
extend beyond the respective end point.
11. End point adjustment
Additional information about configuring the end
points
The end points must be configured in order that the roller
shutters stop at the desired upper and lower positions. It is
imperative that both end points are configured, otherwise
malfunctions may occur.
If the RolloTron Standard is operated without an end
point setting, the drive will continue to run for as long
as one of the two control buttons is actuated.
The automatic functions remain blocked until the end
point setting is configured.
i