RADEMACHER RolloTron Comfort 1615 45 19 Operating And Assembly Manual Download

Page: 74 / 88

21. Removing the RolloTron Comfort DuoFern (e.g. in the event of a move)

Erase all settings.

Simultaneously press and

hold the buttons for 5

seconds.

Fully close the roller shutters.

Keep the button held down.

Pull out the belt as far as possible from the top of the

RolloTron Comfort DuoFern.

Remove the cover plate from the lower mounting

holes.

◆

You can remove the front panel by gripping the

small notch in the lower side of the device.

Subsequently, release the fastening screws and pull

the RolloTron Comfort DuoFern completely out of the

belt box.

Remove the belt compartment cover.

There is a risk of injury

from the reel.

◆

Never reach into the reel compartment when the

motor is running. Always remove the mains plug

before touching the reel compartment.

Summary of Contents for RolloTron Comfort 1615 45 19

























































































Search results

Summary of Contents for RolloTron Comfort 1615 45 19

Reviews:

Related manuals for RolloTron Comfort 1615 45 19

Brands by name

Popular brands

RADEMACHER RolloTron Comfort 1615 45 19, Operating And Assembly Manual

Search results

Summary of Contents for RolloTron Comfort 1615 45 19

Reviews:

Related manuals for RolloTron Comfort 1615 45 19

Brands by name

Popular brands