61
13
14
12
9
8
EN
1.
Fit the middle support (13) clip at a suitable
place, as near as possible to the middle point
between the door and the drive head.
Legend
13
= Centre suspension
14
= Hexagon screws (8 x 60 mm)
9.12 (D) Installation of the middle support clip (13)
3.
Screw the door bracket (8) tight to the frame
with the enclosed self-tapping hexagon screws
(8 x 15 mm).
4.
Finally, fix the door connector (12) to the door
bracket (8) with the enclosed bolt (9).
NOTE!
◆
A straight door connector is supplied pre-mounted, and
this is permanently fixed to the rail.
◆
If you wish to use the bent door connector
(12)
enclosed
(depending upon your door particular configuration),
you must attach this with two hexagon screws (8 x 20)
to the straight door connector.
5.
Finally, secure the bolt (9) by attaching the
securing bolt (11) to prevent it from slipping out.
9.11 (C) Installation of the door bracket (8)
