57
1
2
4
5
3
EN
9.7 Connect the door drive housing to the rail (90° drive assembling)
Alternative installation of the drive transversely to the rail.
NOTE!
The microswitch (
3
) must always be positioned at the
end of the rail. For this reason, the microswitch (
3
)
must be correspondingly moved if the drive is installed
transversely (see figure above).
Mortal danger due to electric shock when under-
taking any work on the microswitch (3).
◆
Arrange for a qualified electrician to move the
microswitch
(3)
.
◆
The microswitch
(3)
may only be moved if the
system is fully de-energised.
◆
Always remove the mains plug and secure it to
prevent it being switched back on prior to under-
taking the work.
◆
Check that the system is de-energised.
