53
EN
Important notes
◆
Tubular motor running times can vary depending on temperature. For this reason, targeted
movement to a specific position is subject to certain tolerances.
◆
The running time must be configured as precisely as possible in order for the desired
position to be reliably assumed.
◆
The running time must be reconfigured if the end points are changed.
◆
If the running time is configured, for example, with the help of a stopwatch, then the speed
should be measured in the up direction and approx. 10% should be added.
18.2 Menu 9.2 - Configure motor running time
1.
Select and open menu
9.2
Motor running
time
.
2.
Select a DuoFern actuator.
4.
Press the
[ Up ]
button and wait until the roller
shutters have travelled to the upper end point.
6.
Back to system menu.
The running time will be timed and stored
during the up cycle.
3.
Press the
[ Down ]
button and wait until the
roller shutters have travelled to the lower
end point.
5.
Release the
[ Up ]
key.
Summary of Contents for DuoFern HomeTimer 9498-UW
Page 70: ...70 EN...
Page 71: ...71 EN...
